L10000 vs L4000
The L4000's signal-to-noise is 90 dB against the L10000's 100 dB, its thd 0.060% against 0.030%, its output voltage 15.0V RMS against 20.0V RMS, and its output impedance 150Ω against 200Ω.
AI-generated product photo — not official manufacturer imagery.
AmplifiersPre-AmplifiersTube AmplifiersDiscontinued
About the L10000
The Allnic Audio L-10000 OTL/OCL is a flagship remote-controlled line-stage preamplifier using an output transformerless (OTL) and output capacitorless (OCL) topology for direct coupling between its 300B output tubes and connected power amplifiers. It employs a triple gain stage with 6AN8 and 12AU7 tubes driving four 300B direct-heated triodes in SEPP configuration, minimizing coloration for highly accurate, dynamic sound. The circuit features Allnic's Active Balanced Positive and Negative Feedback Circuit controlled by the 6AN8 pentode to reduce distortion and optimize linearity. A true dual-mono layout and a 61-step silver-contact constant-impedance attenuator provide precise volume control. Connectivity includes five line-level inputs (2 RCA, 3 XLR) and three outputs (2 RCA, 1 XLR). Praised for holographic soundstaging, natural instrument timbre, and a low noise floor, the L-10000 weighs approximately 22-23 kg and consumes around 120 W.
Specifications
Analog Output
Analog signal output specifications
- THD
- 0.030%
- SNR
- 100 dB
- Output Voltage
- 20.0V RMS
- Output Impedance
- 200Ω
Connectivity
Input and output connections
- Digital Inputs
- XLR, RCA
- Analog Inputs
- XLR, RCA
Physical Dimensions
Size, weight, and appearance
- Dimensions
- 430 × 280 × 450 mm (W × H × D)
- Weight
- 22.5 kg (50 lbs)
Specifications are community-contributed and may not be accurate or complete. Verify all details with the manufacturer before making purchasing decisions. Terms & Conditions