C 326BEE

About the C 326BEE

The NAD C 326BEE is a high‑performance stereo integrated amplifier aimed at music listeners who want high‑quality sound at a reasonable price. It delivers a continuous 50 watts per channel into either 8 or 4 ohms across 20Hz–20kHz with very low total harmonic distortion of 0.009%. Frequency response is rated to within ±0.1dB from 20Hz to 20kHz and –3dB from 3Hz to 70kHz, ensuring wide‑bandwidth, neutral performance. NAD’s proprietary PowerDrive circuitry provides substantially higher dynamic power (up to 200W per channel into 2 ohms) for demanding musical peaks and better control of difficult speaker loads. A selectable Soft Clipping circuit gently limits the amplifier’s output as it approaches clipping, reducing harsh distortion and helping protect speakers during sustained high‑level listening. The C 326BEE offers seven line‑level analog inputs (including a front‑panel 3.5mm “MP” media player input), a tape monitor loop, pre‑out/main‑in jacks that allow the preamp and power amp sections to be separated, and two line‑level subwoofer outputs. Gold‑plated RCA connectors, relay‑switched input selection, and short, discrete signal paths support low noise and high reliability. Front‑panel controls include input selection, volume, balance, bass and treble tone controls, plus a Tone Defeat switch that bypasses the tone circuitry for the most direct signal path. A 1/4" headphone jack and IR sensor are also provided. The amplifier is built around a Holmgren toroidal power transformer and uses a detachable power cord. It is supplied with the NAD SR 8 system remote control. The C 326BEE measures approximately 17-1/8" (435mm) wide, about 4" (100–116mm) high, and 11–13" (286–332mm) deep, and weighs around 15.2 lb (6.9kg). Introduced around 2009 and discontinued mid‑2010s, it is no longer in production but remains well regarded for its combination of solid power, musical sound quality, and value within NAD’s Classic Series lineup.